Our app is available on the Apple App store. Download Here

Starting and Stopping Sessions


What's in the box?



Twist Mount

Follow the below instructions for best results:

  1. Start with dry shoulder pads

  2. Remove the adhesive liner from the back of the Twist Mount included in the Helios Core box

  3. Place the Twist Mount on a flat section on the center front or back of the shoulder pads

  4. Apply *firm* hand pressure for 30-60 seconds. This directly affects how strong the bond will be

  5. Allow several hours for the adhesive bond to cure before impacts or getting the shoulder pads wet

Strap Mount

Follow the below instructions for best results:

  1. Starting with the black tip, insert the end of the strap into one of the slots on the Core from the front side

  2. Fold the black tip back onto the orange section to form a hinged connection

  3. Wrap the strap around the center pillar on the front or back of your shoulder pads, looping the orange tip of the strap through the second slot on the Core from the back side

  4. Pull snug removing slack and connect the hooks on the orange tip to the loops on the orange section to lock the Core in place

Mounting Examples